HYPERLINK V1 ULTRALIGHT

1.5392.009 included VAT - IVA

  • Highest quality light weight materials
  • The most versatile foil kite on the market
  • 4-Line and 5-Line modes
  • State of the art technology
  • Innovative Valve Design – Closed Cell or Open Cell
Clear

HYPERLINK v1 ULTRALIGHT

A NEW ERA, EVAN LIGHTER

Product Info

THE HYPERLINK V1 IS ALSO AVAILABLE IN AN ULTRA LIGHT VERSION. THIS IS THE SAME DESIGN PRODUCED WITH HIGH QUALITY LIGHTWEIGHT MATERIALS TO REDUCE WEIGHT AND PACKING VOLUME TO A MINIMUM.

The Ultra Light version is 25% lighter and packs down to around half the size!

The Ultra Light offers true performance increases and enhanced flying characteristics. It inflates quicker, launches in lighter winds, flies faster, stays in the air longer in gusty conditions, and is more reactive even in the lightest breeze.

The technical backpack is the same design as the standard version using lighter materials.

The Ultra Light kites will be produced on request only, please contact your local dealer/distributor and order early to plan for production and delivery time.

WIND RANGE AND BAR SIZE WATER

WIND RANGE AND BAR SIZE LAND

Wind range is indicative only based on an average rider weight of 80kg. Actual range will vary based on rider skill level and type of board/skis used.

IMPORTANT NOTES:

  • The Hyperlink V1 Ultra Light is for advanced riders only who have previous foil kite experience. The materials have been used extensively on our Ultra Light Kites and Paragliders for the past five years. The kite must be carefully looked after, it needs an experienced rider who knows how to keep the kite up in the air and how to handle it gently on the ground.
  • The kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the kite in waves.
  • Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on your control system. This easy to grab handle makes inflation, self-landing and reverse launch easier.
  • This kite features a simple yet effective front line flag out release (4-Line mode) or optional 5-Line Re-Ride Release. *Only use the 5-Line release when the kite is in Open Cell mode. After releasing the flag out you should check the speed system, bridle lines and flying lines for twists before restart.
  • Speed System and Bridle lines should be regularly checked and maintained in the correct trim or the kite will not perform as designed. If they are worn or not to factory specification (+ or – 15mm) they must be replaced. How To videos and a Bridle Check PDF with all measurements can be found at www.ozonekites.com
Clear

Features

Exceptional Ozone Factory Construction

World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.

Designed With OZ-CAD

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Innovative Zip Valve

Our newly developed Zip Valve allows the Hyperlink to be used as a Closed Cell or Open Cell kite. Essentially opening the Zip Valve converts the kite from a Closed to an Open cell foil, allowing air to pass in both directions. On the snow this is a great advantage as the kite can be landed and packed like a conventional open cell foil.

4-line and 5-line modes

The Hyperlink comes standard with our Front Line Flag Out Release System. This is recommended for water use – it is a simple and effective flag out when the release is activated – it works the same way as our 4-line inflatable water kite range. The optional 5-Line Re-Ride Release System Conversion Kit is recommended for snow or land use. The Re-Ride Release System de-powers the kite instantly without tangling, and falls to the ground to re-launch when ready.

L.E Profile Reinforcements

The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.

Internal Diagonals and Straps

Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.

High Performance Ultra Light Materials

High quality Ultra Light material reduces weight and packing volume to a minimum. The weight saving also drastically improves flying characteristics - the kite will launch in lighter winds, turn quicker and stay in the air longer in gusty conditions. As it is about 25% lighter than our standard kites it is also less resistant to harsh abuse. It needs an experienced pilot who knows how to keep the kite up in the air and how to handle it gently on the ground.

Water Drainage Channels

An internal channel is shaped into the end of each cell along the trailing edge. This allows loose sand or water to run between the cells and out of the tips during flight. The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

Double pulley Speed System

Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.

Sheathed Bridle Lines

High quality, low stretch sheathed Dyneema bridle lines for maximum strength and performance. This is the same bridle line we have used on our Snowkite range for the past 10 years.

Fool proof line connectors

Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Waterproof deflation zipper

Intelligently positioned for easy deflation and pack down.

Bar

CONTROL SYSTEMS
FOIL CONTACT WATER V4
A CLEAN AND SIMPLE DESIGN, WITH AN EASY-TO-USE TRIM SYSTEM AND FEATURING OUR LATEST INNOVATION – THE CLICK-IN LOOP.

Innovative Click-In Loop
An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop…

  • Push Away Quick Release
  • Dos modos de liberación
  • Anti-twist Flag Out Line & Spinning Handle
  • Auto posicionamiento del Chicken Loop
  • Foil Brake Handle
  • Tips blandos con retenedores elásticos escondidos
  • Stainless Steel Leader Line Pin
  • Baja fricción de pieza central
  • Línea De-power recubierta de PU
  • Stainless Steel Trimmer Bracket
  • Clamcleat Trimmer
  • Bungee Trim Line & mango magnético
  • Líneas de vuelo 500kg/300kg
  • Grip de EVA ergonómico
  • Tamaños: 38cm, 45cm, 50cm y 55cm
Clear
Clear
Size

5, 7, 9, 12

Reviews

There are no reviews yet.

Be the first to review “HYPERLINK V1 ULTRALIGHT”

Your email address will not be published. Required fields are marked *